Warren Cutlery On-Line Store

FESTOOL SAWS

Part 561123 - PSB300 Jigsaw
Extended service life thanks to a new design with long-life drive components. Patented three-way saw blade guide for precision cutting with accurate angles, and improved splinterguard for splinter-free cuts (even on veneered surfaces), so that no finishing work is necessary. Simple tool-free saw blade change thanks to the patented FastFix quick change system. Untiring one-handed operation in any position with a favorable center of gravity and ideal switch position, even for cuts under the table. With this jigsaw you can adjust the lower blade guide precisely to keep the blade from pitching out during deep radius cuts . Try cutting a radius on a piece of 4 inch thick maple with any other jigsaw you will see the difference with Festools jigsaw D-handle jigsaw 6A motor Fast-blade change Splinterguard 2 blades hose adapter Power consumption 720 watts/6 amp 120 v AC Stroke rate (1") 1,000 - 2,900 spm Pendulum stroke adjustment 4 stages Bevel adjustment 0° - 45° Cutting depth, wood 4 3/4" (120 mm) Cutting depth, non-ferrous metals 3/4” (20 mm) Cutting depth, steel soft 3/8” (10 mm) Weight 5.06 lbs. (2.3 kg)(PS)/5.29 lbs. (2.4 kg)(PSB)NO SALES TAX ON FESTOOL PRODUCTS EXCEPT NEW YORK STATE CUSTOMERS-SAVE!!!
Price: $310.00
Enter quantity
to cart

Part 561097 - PS300 EQ Jig Saw
The Trion has 3-way blade guidance - first by the pendulum rod, second by the pendulum guide roller, and third at the cutting point by two carbide plates, the patented CP (Carbide Precision) blade guide. The blade stays at exactly the pre-set angle, for precise cuts of all kinds including bevel or miter cuts, and reduced sway out in tight radius cuts. You get virtually no cutting errors, spoiled workpieces, or need for reworking. The Festool Trion jigsaws are among the most powerful jigsaws in existence, with a full 720 W. They can cut 4 3/4" wooden beams, 3/4" aluminum, or 3/8" steel. - Patented three-way blade guide for precise perpendicular cuts - Splinter guard (plastic zero clearance insert) for splinter-free cuts - Multi-Material-Control electronics for constant cutting speed and cleaner cuts - 0-45 degree bevel adjustment for bevel and miter cuts - Non-scarring base plate - Easy FastFix blade change - Low center of gravity and ergonomic switch placement for untiring work - Adjustable pendulum stroke for powerful forward movement - Efficient chip and dust extraction for reduced cleanup and better working environment - Highly durable, sturdy long-life components - Plug it detachable power cord Specifications: Power consumption: 720 Watts / 6 amps 120 v AC Stroke rate (1"): 1000 - 2900 spm Pendulum stroke adjustment: 4 stages Bevel cuts: 0 - 45 degrees Cutting depth in wood: 4 3/4" (120 mm) Cutting depth in non-ferrous metals: 3/4" (20 mm) Cutting depth in steel soft: 3/8" (10 mm) Weight: 5 lbs (2.3 kg)NO SALES TAX ON FESTOOL PRODUCTS EXCEPT NEW YORK STATE CUSTOMERS-SAVE!!!
Price: $310.00
Enter quantity
to cart

Part - Guide Rail FS / 2
Rails work with Festool saws, routers, and jig saws.- Hard-anodized surface - Soft, non-slip coating - Hard rubber splinter guard - Mounting slot for: FSW angle unit, 2 FSV connectors, FSZ clamps, FS-AW Deflector NO SALES TAX EXCEPT NEW YORK STATE CUSTOMERS- SAVE $$$ SELECT SIZE BELOW!!

Select Model # 32"= $63.00 42"=$80.50 55"=$94.50 75"=$168.00 95"=$190.00 106"=$226.00 118"=$287.00 197"=$474.00
Enter quantity
to cart

Part 482107 - Rail Connector for FS / 2
Connectors are used to join together FS/2 rails. Two connectors are needed for each joint connection.
Price: $15.00
Enter quantity
to cart

Part TS55 Saw - Festool Plunge cut saw
Bring the accuracy of a panel saw to any site with the TS 55 saw and guide rail system. This combination provides straight, splinter-free cuts on both sides of the blade right out of the box. Unlike conventional pendulum-cover circular saws, Festool’s design allows the saw blade to retract into the housing giving you the option to start and end the cut accurately anywhere on the material. All of this innovation means a quicker, safer and more cost-effective precision tool. The dust extraction port ensures less dust and a clear view of the workpiece. Saw close to edges, cut apertures and false joints, and cut to length. For solid wood, fine veneered panels and sheet goods of all kinds, plastic, and aluminum. - Comfortable, precise, and safe, thanks to guided saw blade with plunge-cut principle - Quick and easy cutting depth adjustment - Bevel unit allows you to swivel the blade by up to 45 degrees on the guide rail for clean cut edges even on bevel cuts - Detachable Plug-it cord, if the cord gets damaged, just plug in a new one yourself - Rotating dust extractor connector, easy to adjust the dust extraction to suit your work - Spring-loaded riving knife, retracts into the housing automatically during plunge cuts - MMC electronics with 6 control and monitoring functions, including soft start, constant speed under load, stepless speed adjustment, temperature and current-triggered overload protection - FastFix saw blade changing system for easy blade change - Triple motor bearing, improves running smoothness and extends service life - Zero-play guidance, adjust the saw base on the guide rail without tools - Splinterguard on both sides of the cut, guide rail rubber splinterguard on one side, attachable plastic splinter guard on the other side of the blade Includes (1) 55" guide rail (491498) (1) 48-tooth carbide blade (491952) (1) Limit stop FS/2 (491582) (1) Plastic splinterguard (491473 for pack of 5) In Systainer 4 (445597) Note: No tax on Festool products except New York State customers!! SAVE !!
Price: $500.00
Enter quantity
to cart